ReadyNAS 104 6.4.0 with DVBLink5.5 PCTV 461e

[zeipet]

http://www.linuxtv.org/wiki/index.php/P ... %28292e%29
These Drivers are included, and you have a arm device...
CONFIG_VIDEO_EM28XX=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_DVB_SI2168=m

make on cmd a "uname -r" and when there exacly stand "4.1.7.armada.1" it can work.

[SmartyMarty]

@zeipet

OK... so, if I've understood you correctly, the Linux kernel that Netgear have used to build 6.4.0 should directly support the 292e stick?

@everyone

So will DVBLink 5.5.0 work under 6.4.0? Or do I need to wait for a fix from DVBLogic?

I need to be sure before I upgrade - as others have noted, there is no way to downgrade back to 6.2.5...

[zeipet]

No, you need linux driver Modules.

[SmartyMarty]

Thanks zeipet - I'll wait for something official from DVBLogic then.

[peter.parker]

Is there any info when we will get an update?
I updated to 6.4.0 on my RN204 and DVBSource can't see both of my PCTV Cards.

[Oberon]

DVBLink does not support legacy USB tuners on RN2 NAS models. As for other models, where USB tuners were supported previously, we plan to release a new tvsource build at the end of the week.

[peter.parker]

I meant rn102, I mixed up some numbers in my heads

Looking forward to the new tvSource build

[Oberon]

The compatibility with ReadyNAS firmware 6.4.0 is fixed in DVBLink TVSource build 11998.

Update TVSource installation from DVBLink Package Center and reboot your NAS for new drivers to load.

If you were using TT4400/4650 or PCTV292e tuners with dab-t2 signal, you may need to rescan channels for new build to work properly.

[peter.parker]

Awesome! Everthing works again. Money well spend I would say
Next time I check before I upgrade the FW

[SmartyMarty]

It's not working for me with a PCTV 292e stick.

I've upgraded the OS to 6.4.0 OK, and DVBLink to 11998, but under "sources" it's saying "device not present".

The blue light on the stick is OFF. Unplugging and re-inserting the stick in the front port of my ReadyNAS104 results in the light coming on for 5 seconds, then it goes off and stays off.

Any ideas?

[the_man]

It's not working for me with a PCTV 292e stick.

I've upgraded the OS to 6.4.0 OK, and DVBLink to 11998, but under "sources" it's saying "device not present".

The blue light on the stick is OFF. Unplugging and re-inserting the stick in the front port of my ReadyNAS104 results in the light coming on for 5 seconds, then it goes off and stays off.

Any ideas?

Reboot the NAS. If it doesn't help - Log files, please.

[SmartyMarty]

OK - After several reboots it's now found the stick BUT-It only finds some of the multiplexes and won't scan for EPG data.

I think you may have reintroduced the bug in the very first release of 5.5.0 that I reported in July HERE: viewtopic.php?f=76&t=29982

Log files to follow shortly...

[the_man]

OK - After several reboots it's now found the stick BUT-It only finds some of the multiplexes and won't scan for EPG data.

I think you may have reintroduced the bug in the very first release of 5.5.0 that I reported in July HERE: viewtopic.php?f=76&t=29982

Log files to follow shortly...

And please, continue in your own thread on the forum, i'll wait the log files there.