DVBLogic

by **Achim** » Sun Mar 08, 2015 5:14 pm

Hi,

I use the DVBLink TVSource Software (5.1.0) on my Raspberry Pi 2 with the DVB-S Tuner "DVBSky S960 USB Box".

My Problem is that if I start a channel (VLC or kodi) nothing happens. Only if I switch the channel and switch back, the channel starts playing.

Because of that programmed recordings do not work.

I tried every setting in "Advanced settings" at Sources, but I can't find the error.

I made logs, but I don't understand them.

Sorry for the bad English.

by **Achim** » Thu Mar 12, 2015 2:26 pm

Nobody understands the log files? Where is my problem?

by **adder** » Thu Mar 12, 2015 4:35 pm

I had a problem with recordings. In Settings, go Channels, Channel Settings and change the Channel numbering to sequential...

by **Achim** » Thu Mar 12, 2015 4:44 pm

adder wrote:I had a problem with recordings. In Settings, go Channels, Channel Settings and change the Channel numbering to sequential...

Thank you, but that did not fix my problem.

by **the_man** » Thu Mar 19, 2015 4:56 pm

Please update dvblink server and all installed packages, there are some fixes, maybe they help you.
Also look at this viewtopic.php?f=66&t=29433

by **Achim** » Thu Mar 19, 2015 11:49 pm

the_man wrote:Please update dvblink server and all installed packages, there are some fixes, maybe they help you.
Also look at this viewtopic.php?f=66&t=29433

Thank you. I updated everything, but that did not fix my problem.

by **the_man** » Mon Mar 23, 2015 3:11 pm

Can you please again set log level to extended info, restart dvblink server, reproduce the issue and attach zipped log file here?

by **Achim** » Mon Mar 23, 2015 4:53 pm

the_man wrote:Can you please again set log level to extended info, restart dvblink server, reproduce the issue and attach zipped log file here?

After a restart everything works fine. Only if the Pi is idle for a few minutes the problem happens.

I did the following steps in order to reproduce the issue:
1. I set log level to extended info
2. I restarted the Pi
3. I started a channel (It played correctly)
4. I stopped the stream
4. I waited a few minutes
5. I tried to start a channel (Here is the problem. The stream did not load)
6. I switched the channel (This channel played correctly again)
7. I stopped the stream

As client I used kodi.

by **the_man** » Wed Mar 25, 2015 10:34 am

Do you use Openelec? If yes - which version?

by **Achim** » Wed Mar 25, 2015 1:02 pm

the_man wrote:Do you use Openelec? If yes - which version?

As server I use Raspbian.
As client I use VLC and Kodi (14.1 “Helix”) on Windows and Mac OS X.

DVBLogic

Tuner Problem

Tuner Problem

Re: Tuner Problem

Re: Tuner Problem

Re: Tuner Problem

Re: Tuner Problem

Re: Tuner Problem

Re: Tuner Problem

Re: Tuner Problem

Re: Tuner Problem

Re: Tuner Problem

Who is online