Error in Build 14072 ?

DVBLink TV Server for QNAP NAS is discussed here!

Error in Build 14072 ?

Postby Cruiser57 » Wed Feb 22, 2017 6:57 pm

Hi,

I just downloaded DVBLink Server 6.0.0 from your Server for my QNAP TS-251+ with FW 4.2.3
Build installs fine and without fault - Message under the App says "Running"

But even after 25 Minutes I couldn't open the HTTP-Pages on Standard-Port 39876 to update the TV-Source, too.

I reinstalled the old Build 13314 again, an everything works fine again.
(On my Syno DS213 j the new Build is working fine - and yes, I used the different Download qpkg for the QNAP ;-) )

Is there a fault in the package, or is a special procedure needed ?

Best regards,

Tom
DS213j with DSM 6.1-15047 and DVB-Link 6.0.0 (14072) Tuners are the TBS DVB-C Stick and a CT-3650 Cable tuner.
QNAP TS-251+ with QTS 4.2.3 (all Updates) and DVB-Link 6.0.0. (13314) Tuner is HDHomeRun EXPAND HDHR3-4DC
Cruiser57
 
Posts: 38
Joined: Sun Oct 27, 2013 12:14 pm


Re: Error in Build 14072 ?

Postby Oberon » Wed Feb 22, 2017 8:16 pm

Sorry, our fault. There is no error in the build, but we missed important notice in change log.
This build for x86-64 is compatible with QTS 4.3 and higher.

Sent from my XT1072 using Tapatalk
Oberon
 
Posts: 11763
Joined: Thu Sep 06, 2007 5:04 am

Re: Error in Build 14072 ?

Postby daboen » Wed Feb 22, 2017 9:23 pm

Not running this build, the TS-559 Pro+. Where can I get the old version 6 of DVBLink + TVSource?
daboen
 
Posts: 17
Joined: Sat Feb 01, 2014 9:10 pm

Re: Error in Build 14072 ?

Postby the_man » Thu Feb 23, 2017 9:50 am

daboen wrote:Not running this build, the TS-559 Pro+. Where can I get the old version 6 of DVBLink + TVSource?

Write to info@dvblogic.com, they will give you a previous build of the server.
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4696
Joined: Mon Dec 02, 2013 1:11 pm

Re: Error in Build 14072 ?

Postby mavi82 » Sat Feb 25, 2017 8:18 am

can anyone send me the x86 32bit version?
i have updated the server and saw later, that it is only for 64 bit.
mavi82
 
Posts: 1
Joined: Sat Feb 25, 2017 8:16 am

Re: Error in Build 14072 ?

Postby Ettli » Sat Feb 25, 2017 2:18 pm

I have the same problem on a TS-469L
* installed the update
* not possible to access anything after that
* rolback to the old version, access to configuration page is possibly
* but TV source is now different version then the server, dvb-c stick is not available

What can I do to get back to working solution?

Best
Ettli
Ettli
 
Posts: 8
Joined: Thu Jan 09, 2014 7:15 pm

Re: Error in Build 14072 ?

Postby triks » Sun Feb 26, 2017 1:20 pm

Same issue, no compatible tuners found when my Synology 1813+ reports 2 DVB-T tuners connected.
Emailed DVBlogic support - release issue again I am sure!
triks
 
Posts: 6
Joined: Mon May 18, 2015 5:13 am


Return to DVBLink TV Server for QNAP NAS

Who is online

Users browsing this forum: No registered users and 7 guests