QTS dvblink TV source setup procedure and other questions?

[DrJ]

Hello everyone. I have a recently bought Qnap TS 212p NAS and I have been using TV STation successfully with a Hauppage Nova T DVB usb tuner.
TV STation is fine, but I found out that it would be great to be able to see TV in an android device, and the most important, to be able to schedule recordings from an android mobile from the internet. These things can´t be done with TV Station, so that´s why I came to test dvblink. It seems that both things can be done with dvblink, so I started the installation, but I find it hard to setup everything....

I have installed dvblink, the last version gave me problems, once dvblinl server is installed in my NAS using the manual procedure, and it was installed correctly, but whn I open dvblink server to configure it, the page said that no products were installed. So I tried the prioer version, 4.x... and then the configuration page saw the dvblink server installation, so I went on with it... I then installed TVsources and EPG loader, and I activated trial versions for both of them...

My real configuration problem comes now, I don´t know what to do in the configuration pages of the TV source, and I don´t find any information or guide about it. I have tried to do som scan and things like that, but I get tuninf failed messages.

The VSource app seems to detect my tuner, because I see it in the list. I have selected the TV terrestrial for spain, but nothing seems to work.

Can you please confirm me that I will be able to shcedule recordings from the internet usin the mobile app, and if so, can you please give me the necesary configuration steps for tvsources?.

Best regards and thank you very much in advance.

[the_man]

Do you see that instruction? if not, it must help you.
http://dvblogic.com/wiki/index.php/How_ ... _or_higher

there are actually simple, you need to understand a little bit, but if there are any questions arise, please contact us we will investigate.

[the_man]

and yet very important when you are working with dvblink you need to disable TV Station, otherwise scanning transponders will get tuning failed message

[DrJ]

First of all, thank you very much for your fast answer. I will try this link, I didn´t find it when I first look for instructions....

Anyway, I think that the procedure is not exactly the same as in my case, when I add the TV source instance in my tuner, I don´t get the option to scan channels.... is strange, I will give it another try this afternoon....

Just to be sure that I don´t wast time stupidly, can you confirm me that I will be able to schedule recording tasks from my phone in the internet?. Because if I will not be able to do this, then I tis not worthy for me to try it harder, it is ok with TV station for me. And aboyt TV Station, it is necessary to disable TV Station in my nas in order to get dvblink working?.

Best regards.
EDIT: OK, you were faster than me telling me that TV Station needs to be off, I guess this is my main mistake, it was on when I tried the procedure, so I will test it with tv Station off, and it should work flawlessly....

Do you see that instruction? if not, it must help you.
http://dvblogic.com/wiki/index.php/How_ ... _or_higher

there are actually simple, you need to understand a little bit, but if there are any questions arise, please contact us we will investigate.

[the_man]

Just to be sure that I don´t wast time stupidly, can you confirm me that I will be able to schedule recording tasks from my phone in the internet?.

yes you can. you will need to install the DVBLink client 2.2 for android. you can fully manage your records,and schedule recording tasks

And aboyt TV Station, it is necessary to disable TV Station in my nas in order to get dvblink working?.

TV Station should be disabled , it can affect the performance tuner problemmy scanning may occur because of it

[DrJ]

Perfect, just one more thing, what will I need to do to be able to access dvblink from the internet?, I guess I will have to setup something in my router, won´t I?.

Best regards, and again, thank you very much for your fast responses.

Just to be sure that I don´t wast time stupidly, can you confirm me that I will be able to schedule recording tasks from my phone in the internet?.

yes you can. you will need to install the DVBLink client 2.2 for android. you can fully manage your records,and schedule recording tasks

And aboyt TV Station, it is necessary to disable TV Station in my nas in order to get dvblink working?.

TV Station should be disabled , it can affect the performance tuner problemmy scanning may occur because of it

[the_man]

to be able to access dvblink from the internet you need do this:
http://dvblogic.com/wiki/index.php/How_ ... forwarding

[DrJ]

OK, thank you verymuch, I will try to do everything this afternoon, if I can get some time ;->.

Best regards and thank you very much.

to be able to access dvblink from the internet you need do this:
http://dvblogic.com/wiki/index.php/How_ ... forwarding

[DrJ]

I am afraid I failed the job, grrrr... when I disable TV Station the tuners disapear in the configuration web page of dvblink, so I am not able to set it up, snifff...

Any help about it?

Best regards.

OK, thank you verymuch, I will try to do everything this afternoon, if I can get some time ;->.

Best regards and thank you very much.

to be able to access dvblink from the internet you need do this:
http://dvblogic.com/wiki/index.php/How_ ... forwarding

[DrJ]

I am afraid I failed the job, grrrr... when I disable TV Station the tuners disapear in the configuration web page of dvblink, so I am not able to set it up, snifff... and with tv station enabled I get tuning failed...

Any help about it?

Best regards.

OK, thank you verymuch, I will try to do everything this afternoon, if I can get some time ;->.

Best regards and thank you very much.

to be able to access dvblink from the internet you need do this:
http://dvblogic.com/wiki/index.php/How_ ... forwarding

[the_man]

Do you say that the tuner disappears in the TVSource list ?
Please set log level to info,reboot the NAS and attach zipped log files here.
to set log level ... http://dvblogic.com/wiki/index.php/How_ ... _log_files

[the_man]

And one more thing. Look there if your tuner in the list of officially supported
http://dvblogic.com/en/software/qnap-ar ... -tvsource/

[DrJ]

Yes the tuner disapears from tv source when I set tv station.
Here you have the log.

Best regards.

Do you say that the tuner disappears in the TVSource list ?
Please set log level to info,reboot the NAS and attach zipped log files here.
to set log level ... http://dvblogic.com/wiki/index.php/How_ ... _log_files

[DrJ]

Yes, my tuner is in the list, is the nova-t and it works fine with tv station. It is strange, but in tv source 2 nova-t tuners apear, I don´t know wht, because I don´t remember that i had 2 tuners....

I think I read something about the same error as me that the tuners disappeared.
One mor thing, Why am I not able to install last version of DVBLink?, when I install the last one, and then open the configuration page, it says that no product is installed... I am testing with the 4.5x version.

Best regards.

And one more thing. Look there if your tuner in the list of officially supported
http://dvblogic.com/en/software/qnap-ar ... -tvsource/

[DrJ]

Sorry, I forgot to attach the file.

Best regards

It seems that I am not able to upload files in the forum with internet explorer, how rare...