Page 1 of 1

Failed to start device for driver

PostPosted: Thu Nov 24, 2016 10:50 pm
by M.Eder
Here my hardware:
Asustor NAS 6102T
DVBLink 6.0
USB TVButler
USB PCTV 461e

DVBLink is installed, also the TV Sources, signal quality and strength is good but I do not get a picture "Sorry cannot display this channel either because there is a technical problem or no TV signal"
My log files shows me massive faults "Failed to start device for driver" so I suppose a similar problem like http://forum.dvblogic.com/viewtopic.php?f=78&t=30745
THX for reply/help!

Re: Failed to start device for driver

PostPosted: Mon Nov 28, 2016 4:41 pm
by the_man
I ma assume the TVButler is visible but the PCTV tuner is not.
What NAS OS version do you have?

Re: Failed to start device for driver

PostPosted: Fri Dec 16, 2016 5:57 pm
by M.Eder
Both are visible, but both show the picture "Sorry cannot display this ..."
NAS OS: ADM 2.6.5R9N1

Re: Failed to start device for driver

PostPosted: Mon Dec 19, 2016 1:25 pm
by the_man
Please, try to remove the channels at the Channels -> Selected channels table
and make a rescan of the frequencies. after that add channels to the list once more. check the stream.

Re: Failed to start device for driver

PostPosted: Tue Dec 20, 2016 11:48 pm
by M.Eder
THX for your help, now it works!