'Device is not present' after update to ADM 2.5.3.RE23

DVBLink TV Server for ASUSTOR NAS is discussed here!

'Device is not present' after update to ADM 2.5.3.RE23

Postby Micha » Thu Feb 04, 2016 7:50 pm

Hello,

I have just updated my Asustor AS-5102T NAS to ADM 2.5.3.RE23 and now I have found that the TV Server is not recognizing my DVB-T source ( PCTV 461e ). Under Settings - TV Sources it just has 'Device is not present'.

I deinstalled dvblink and reinstall it new, but it did't work.
Micha
 
Posts: 3
Joined: Thu Feb 04, 2016 7:03 pm


Re: 'Device is not present' after update to ADM 2.5.3.RE23

Postby clinton.hall » Fri Feb 05, 2016 1:49 am

https://forum.dvblogic.com/viewtopic.php?f=78&t=30745
we are waiting for the DVBLogic team to get a copy of the GPL Kernel so that they can recompile the device drivers...
clinton.hall
 
Posts: 8
Joined: Wed Jan 27, 2016 12:52 pm

Re: 'Device is not present' after update to ADM 2.5.3.RE23

Postby the_man » Fri Feb 05, 2016 10:39 am

Micha wrote:Hello,

I have just updated my Asustor AS-5102T NAS to ADM 2.5.3.RE23 and now I have found that the TV Server is not recognizing my DVB-T source ( PCTV 461e ). Under Settings - TV Sources it just has 'Device is not present'.

I deinstalled dvblink and reinstall it new, but it did't work.

Unfortunately, it may take several weeks before we can rebuild and then test all drivers.
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4696
Joined: Mon Dec 02, 2013 1:11 pm

Re: 'Device is not present' after update to ADM 2.5.3.RE23

Postby eightace » Sat Feb 06, 2016 10:53 am

Simple solution is to revert back to the previous firmware. Not sure if this is possible on the current release though.
eightace
 
Posts: 10
Joined: Sat Jan 31, 2015 9:01 pm

Re: 'Device is not present' after update to ADM 2.5.3.RE23

Postby Micha » Sat Feb 06, 2016 10:58 am

Asustor writes (http://www.asustor.com/service/release_note?id=5):

ADM 2.5.3.RE23
2016-02-02
Installation Notes

This is the software for AS50xx/AS51xx series. No matter if you decide to upgrade ADM or not, it is still recommended that you should back up all data on your NAS.
Since the file structure in the ADM 2.5 has been modified, you will not be able to roll back to a previous version of ADM after upgrading.
When performing a system migration from a newer version of ADM to an older version of ADM, please be sure to upgrade the destination NAS with latest version of ADM after system migration completes.
Micha
 
Posts: 3
Joined: Thu Feb 04, 2016 7:03 pm

Re: 'Device is not present' after update to ADM 2.5.3.RE23

Postby clinton.hall » Mon Feb 08, 2016 11:18 am

I think I have found a work-around.

Install Media-pack App (from Asustor)
then make a backup of
/volume1/.@plugins/AppCentral/dvblink-server/bin/lib/ko

Now do the following via ssh

Code: Select all
cp -rf /volume1/.@plugins/AppCentral/media-pack/drivers/* /volume1/.@plugins/AppCentral/dvblink-server/bin/lib/ko/


Essentially, copy the Drivers from media-pack App over to dvblink.
Appears to have worked for me...
clinton.hall
 
Posts: 8
Joined: Wed Jan 27, 2016 12:52 pm

Re: 'Device is not present' after update to ADM 2.5.3.RE23

Postby balu294 » Tue Feb 09, 2016 12:12 pm

Thanks for your information
ASUSTOR 602T AMD 2.5.3.RE23 PCTV282e
dvblink works for me now
balu294
 
Posts: 1
Joined: Tue Feb 09, 2016 11:42 am

Re: 'Device is not present' after update to ADM 2.5.3.RE23

Postby Micha » Thu Mar 03, 2016 8:37 pm

DVBlogic support has a solution:
_____________________________
Hi ...,
Please, try to make an update of TVSource or make a repair of it. Then reboot the NAS and go to the Sources tab. (Results ?)
There was a new built for TVSource for ADM2.5.3
http://forum.dvblogic.com/viewtopic.php ... 7&start=15

Kind regards,
DVBlogic support team
____________________________
This update wasposted on Wed Feb 24, 2016 11:36 am:
____________________________
DVBLink 5.5.x: list of fixes and new features

Postby Oberon » Wed Feb 24, 2016 11:36 am
Build 12450 DVBLink TVSource on Netgear R6 ARM and ASUSUTOR AS5/6/7 platforms

DVBLink TVSource
(netgear r6 arm) Added: support for ResadyNAS R6 ARM 6.4.2 firmware
(netgear as5/6/7) Added: support for ASUSTOR ADM 2.5.3 firmware
____________________________
It worked for me
Micha
 
Posts: 3
Joined: Thu Feb 04, 2016 7:03 pm


Return to DVBLink TV Server for ASUSTOR NAS

Who is online

Users browsing this forum: No registered users and 4 guests