Scanning error: IDS_TUNER_ERROR_MSG

Discuss DVBLink AnalogTV here!

Re: Scanning error: IDS_TUNER_ERROR_MSG

Postby EZEd » Mon Dec 02, 2013 7:07 pm

Oberon wrote:Aha, it's getting more clear now, because the log messages are very unusual. I believe this tuner cannot be used at the same time to serve NTSC and ATSC - and this is what you are trying to do. You need two different tuners to be able to do that.


So you are saying that eventhough the tuners have two separate RF feed ports and have two separate onboard chips (one handling ATSC, the other handling NTSC) because they are physically on the same board, DVBLink still sees them as one tuner? That I would need to stop using the ATSC capability for it to only use the NTSC capability? Is that what you mean?
EZEd
 
Posts: 8
Joined: Fri Nov 22, 2013 2:47 am


Re: Scanning error: IDS_TUNER_ERROR_MSG

Postby EZEd » Tue Dec 03, 2013 4:25 am

EZEd wrote:
Oberon wrote:Aha, it's getting more clear now, because the log messages are very unusual. I believe this tuner cannot be used at the same time to serve NTSC and ATSC - and this is what you are trying to do. You need two different tuners to be able to do that.


So you are saying that eventhough the tuners have two separate RF feed ports and have two separate onboard chips (one handling ATSC, the other handling NTSC) because they are physically on the same board, DVBLink still sees them as one tuner? That I would need to stop using the ATSC capability for it to only use the NTSC capability? Is that what you mean?


So I tried only using the NTSC tuners for the M780 and the ATSC tuners on the Avermedia Duet 188 that are also installed in the PC but on a separate board. DVBLink still would not scan the NTSC tuners connected to analog cable. I still get the same message from the subject line. I assume this means that TVSource for ATSC and AnalogTV for NTSC can not be used within DVBlink at the same time with any tuner combination. So it looks like AnalogTV is bust for me. If this is the case then I'll likely just get an HDHomeRun and do networked tuning that way on my network instead of DVBLink.
EZEd
 
Posts: 8
Joined: Fri Nov 22, 2013 2:47 am

Re: Scanning error: IDS_TUNER_ERROR_MSG

Postby nars » Sat Aug 01, 2015 7:26 am

JFYI I'm testing trial version and I'm also getting same exact error, with an old Pinnacle PCTV analog card.

dvblink_server.log:
Code: Select all
2015-Aug-01 07:20:48:   [I] Looking for preferred filter for @device:pnp:\\?\pci#ven_109e&dev_036e&subsys_1200bd11&rev_11#4&2e98101c&0&20f0#{a799a800-a46d-11d0-a18c-00a02401dcd4}\global
2015-Aug-01 07:20:48:   [I] Found preferred filter: @device:pnp:\\?\pci#ven_109e&dev_036e&subsys_1200bd11&rev_11#4&2e98101c&0&20f0#{a799a801-a46d-11d0-a18c-00a02401dcd4}\global


dvblink_webserver.log:
Code: Select all
[01/Aug/2015:07:20:47] DVB.ATV.TV Start scan. AnalogTV-1
[01/Aug/2015:07:20:48] DVB.CMN.HP Traceback (most recent call last):
  File "helper.py", line 21, in ff
  File "scantv.py", line 95, in start
RuntimeError: IDS_TUNER_ERROR_MSG


If you need any further infos from me please let me know. It's sad that it doesn't work, as there no many other similar software with similar features for analog cards, but this one doesn't seem to work at all for a few people anyway :(
nars
 
Posts: 1
Joined: Sat Aug 01, 2015 7:16 am

Re: Scanning error: IDS_TUNER_ERROR_MSG

Postby abrahim456 » Thu Oct 05, 2017 12:31 pm

Hello..
I am looking for a solution that I am suffering from one problem that is recently I have done my scanning of all documents of a mobile phone but there is some error has been occure so please anyone tell me what should I do in this situation and how to solve that error and how to scan my important documents?
abrahim456
 
Posts: 1
Joined: Thu Oct 05, 2017 12:12 pm

Previous

Return to DVBLink AnalogTV

Who is online

Users browsing this forum: No registered users and 1 guest