One tuner isn't being initialised

DVBLink TVSource is discussed here!

One tuner isn't being initialised

Postby dgre057 » Mon Oct 30, 2017 8:13 pm

Hi there. I have a sort of strange problem...I'm not entirely sure how long it has existed.

I have three tuners:
    2 x Digital Devices Cine S2 v7 (dual tuner)
    1x TBS 6981 S2 (dual tuner, but only one is working)
All three tuners are set up in TV Source, all with the same channels merged. But if I try to watch/record from three channels simultaneously, I get a "Sorry, cannot display this channel either because there is a technical problem or no TV signal" on the third tuner.

I've used the "Monitoring" tool in the diagnostics tab of DVBLink Config.
    Tuner 1 (DD1) is used first
    Tuner 3 (TBS1) is used second
    Tuner 2 (DD2) is never used
If I do a Stream Check, tuner 2 is working fine on all channels.

Does anyone know what might be causing the problem, and where I can start looking to fix it?

I'm using Windows 10, DVBLink Server 6.0.0 and WMC (although the same is true if I watch/record directly through DVBLink).

Thanks!
dgre057
 
Posts: 33
Joined: Thu Jan 20, 2011 12:13 am


Re: One tuner isn't being initialised

Postby the_man » Wed Nov 29, 2017 10:12 am

Do you have they same list of channels from all tuners?
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4696
Joined: Mon Dec 02, 2013 1:11 pm


Return to DVBLink TVSource

Who is online

Users browsing this forum: No registered users and 6 guests