Octopus NET CI Multi Transponder Technologie (MTD)

General discussions over DVBLink products

Octopus NET CI Multi Transponder Technologie (MTD)

Postby stefkle » Tue Nov 11, 2014 8:36 pm

Hello,

with v5.1 and Octopus NET, can i use the Multi Transponder Technologie (MTD) so that a single CAM modul can encrypted up to 4 TV channels ? (As it described here http://www.digitaldevices.de/english/Co ... rface.html)

If yes, does this also work with DVBLink on NAS devices ?

Thanks,

Stefan
stefkle
 
Posts: 5
Joined: Fri Nov 02, 2012 9:46 pm


Re: Octopus NET CI Multi Transponder Technologie (MTD)

Postby Oberon » Tue Nov 11, 2014 8:55 pm

Yes, but only channels from the same tuner. Several tuners in Octopus.NET cannot share the same CI module.
Oberon
 
Posts: 11763
Joined: Thu Sep 06, 2007 5:04 am

Re: Octopus NET CI Multi Transponder Technologie (MTD)

Postby tcviper » Sun Nov 16, 2014 1:12 pm

I tried to use the Octopus.NET 4/4 tuner with Cable (Ziggo) and CI card and enabled this in DVBLink (Synology) 5.1, normal channels work but encrypted wont and i have no idea why, the CAM card + Alphacrypt works fine in a TV. I get a black screen and 0 errors show up under monitor:

2014-Nov-16 13:00:05: [E] transponder_streamer::start_channel. Tuning stransponder for channel 207f2074-03cf-4da7-90dd-e24222ab6854:538750:1000:26:2204 failed
2014-Nov-16 13:00:05: [E] stream_manager::::add_stream_to_source. Switching to channel 13630000 of source 561d688e-bc88-4883-8c73-734fdde08799 failed.
2014-Nov-16 13:00:05: [E] stream_manager::::add_stream_to_source. Switching to channel 13630000 of source 3c99dc7e-9425-42c8-b241-539c156ca7c7 failed.
2014-Nov-16 13:00:09: [E] http_provider: http write error
2014-Nov-16 13:00:42: [E] sat2ip_streamer::send_perpare_command. Server response does not cotain com.ses.streamID header
2014-Nov-16 13:03:15: [E] http_provider: http write error
2014-Nov-16 13:08:01: [E] http_provider: http write error
2014-Nov-16 13:08:21: [E] sat2ip_streamer::send_perpare_command. Server response does not cotain com.ses.streamID header
2014-Nov-16 13:08:24: [E] sat2ip_streamer::send_perpare_command. Server response does not cotain com.ses.streamID header
2014-Nov-16 13:08:24: [E] CTVSStreamSource::IntTuneTransponder. m_DeviceControl.SetTuner returned an error
2014-Nov-16 13:08:24: [E] transponder_streamer::tune_transponder_impl. Tune transponder returned error
2014-Nov-16 13:08:24: [E] tune_transponder. Unable to tune transponder
2014-Nov-16 13:08:24: [E] transponder_streamer::start_channel. Tuning stransponder for channel 207f2074-03cf-4da7-90dd-e24222ab6854:554750:1000:29:201 failed
2014-Nov-16 13:08:24: [E] stream_manager::::add_stream_to_source. Switching to channel 13470000 of source 561d688e-bc88-4883-8c73-734fdde08799 failed.
2014-Nov-16 13:08:24: [E] stream_manager::::add_stream_to_source. Switching to channel 13470000 of source 3c99dc7e-9425-42c8-b241-539c156ca7c7 failed.
2014-Nov-16 13:08:29: [E] http_provider: http write error

Any idea?
tcviper
 
Posts: 50
Joined: Sat Aug 20, 2011 1:14 pm
Location: Netherlands

Re: Octopus NET CI Multi Transponder Technologie (MTD)

Postby daverichter » Sun Nov 23, 2014 1:58 pm

Hi,

i have the same problem...
no encryption... only black screen :(
daverichter
 
Posts: 8
Joined: Sun Nov 23, 2014 1:57 pm

Re: Octopus NET CI Multi Transponder Technologie (MTD)

Postby tcviper » Sun Nov 30, 2014 11:12 am

Any idea/solution for this?
tcviper
 
Posts: 50
Joined: Sat Aug 20, 2011 1:14 pm
Location: Netherlands


Return to General

Who is online

Users browsing this forum: No registered users and 1 guest

cron