No output on encrypted streams (DVB-S) with DVBSky 950C

DVBLink TV Server for Ubuntu linux is discussed here!

No output on encrypted streams (DVB-S) with DVBSky 950C

Postby sputnik73 » Mon Nov 30, 2015 9:25 pm

Hardware: DVBSk 950CI DVB-S2 (PCIe) on Debian jessie. Current drivers and firmware are installed, the card is detected correctly:

Code: Select all
[    4.147471] CORE cx23885[0]: subsystem: 4254:950c, board: DVBSKY S950CI DVB-S2 CI [card=46,autodetected]
[    5.015231] cx23885_dvb_register() allocating 1 frontend(s)
[    5.015237] cx23885[0]: cx23885 based dvb card
[    5.087671] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)...
[    5.088066] cx23885 0000:02:00.0: firmware: direct-loading firmware dvb-fe-ds3103.fw
[    5.988335] DVB: registering new adapter (cx23885[0])
[    5.988339] cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)...
[    6.015742] DVBSKY PCIe MAC= 00:17:42:54:95:0c
[    6.047040] Registered IR keymap rc-dvbsky
[    6.047179] input: cx23885 IR (DVBSKY S950CI DVB-S2 CI) as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/rc/rc0/input12
[    6.050776] rc0: cx23885 IR (DVBSKY S950CI DVB-S2 CI) as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/rc/rc0
[   12.130734] dvb_ca adapter 0: DVB CAM detected and initialised successfully


CAM and CI Modul seem to work:

# gnutv -cammenu
Code: Select all
CAM supports the following ca system ids:
  0x0d95

CAM Application type: 01
CAM Application manufacturer: cafe
CAM Manufacturer code: babe
CAM Menu string: CryptoWorks
CAM supports the following ca system ids:
  0x0d00

1. CAS Version:CryptoWorksCIM2.00.00.01
2. CAS Hersteller:CryptoWorks Co.Ltd.
3. SW Version:CW-STD-3.9.11
4. HW Version:2.2.1
5. Seriennummer:xxxx
6. Ausstellungsdatum: Jul  1 2009

1. Label:CryptoWorks
2. Adresse: :0 0003 4940 4416 1
3. Hergestellt von:CryptoWorks
4. Aktueller MR: : Nicht definiert
5. G?ltig bis: 1990  0  0


However I cannot view encrypted channels (Webclient, App). None encrypted channels are displayed. CI Module and Card work fine on my TV.

I alread spent a lot of time with this an would be glad for any help!

thx, Oliver
sputnik73
 
Posts: 4
Joined: Mon Nov 30, 2015 9:06 pm


Re: No output on encrypted streams (DVB-S) with DVBSky 950C

Postby Oberon » Mon Nov 30, 2015 9:32 pm

set log level to info, restart dvblink server, reproduce the issue and attach zipped log files here.
Oberon
 
Posts: 11763
Joined: Thu Sep 06, 2007 5:04 am

Re: No output on encrypted streams (DVB-S) with DVBSky 950C

Postby sputnik73 » Mon Nov 30, 2015 9:59 pm

Thx, here the zipped log.

The URL was http://mediaserver:8101/dvblink/direct? ... 48&lng=deu

(settings: "transcoding deactivated" unchecked, bitrate 2048, video scaling 1024x768 for testing, "transcoding allowed" checked. DVBLink Server 5.5.0 , DVBLink TVSource 5.5.0 build 11892)

regards, Oliver
Attachments
dvblink-log-20151130-2151.zip
Zipped logginfo (info level) while trying to view an encrypted channel (DVBLink Webinterface/Chrome)
(107.67 KiB) Downloaded 127 times
sputnik73
 
Posts: 4
Joined: Mon Nov 30, 2015 9:06 pm

Re: No output on encrypted streams (DVB-S) with DVBSky 950C

Postby the_man » Wed Dec 02, 2015 1:03 pm

Can you try to play encrypted channel with VLC player and after a few minutes attach new zipped log file here.
"How to" look here:
http://dvblogic.com/wiki/index.php/DVBL ... er_clients
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4696
Joined: Mon Dec 02, 2013 1:11 pm

Re: No output on encrypted streams (DVB-S) with DVBSky 950C

Postby sputnik73 » Wed Dec 02, 2015 9:25 pm

Thx. VLC succefully fetched the channels for live tv via command=get_playlist_m3u. I can watch free channels, but not the encrypted ones. It seems the client is not the problem, but the server.

It's a standard Debian jessie server. I had/have the same problem with an other DVB-S card (TechnoTrend TT-budget S2-3200) and hoped the hardware would be the problem. I also tried 2 different CI-Modules unsuccessfully. The currently used CI Module and card are definitly working on a TV set.

Update 3/12/15: I removed the logs from yesterday, it seems nothing got logged lately to dvblink_server.log until I restarted the server today. Attached new log today (tried to open stream of encrypted channel with vlc several times. vlc skips the broken streams and finally shows the first successfull one (unencrypted).

thx, Oliver
Attachments
dvblink-log-20151203-1002.zip
Logging access via VLC (playlist via command=get_playlist_m3u).
(103.3 KiB) Downloaded 125 times
sputnik73
 
Posts: 4
Joined: Mon Nov 30, 2015 9:06 pm

Re: No output on encrypted streams (DVB-S) with DVBSky 950C

Postby the_man » Fri Dec 04, 2015 5:05 pm

I can mistaken, but at first look all work good, but for unknown reason, there are no stream, and triggered timeout :
Code: Select all
[I] ts_converter::ProcessPMTPacket. PMT is found and parsed successfully. Starting streaming.
2015-Dec-03 10:00:52:   [I] CAM Application type: 01
2015-Dec-03 10:00:52:   [I] CAM Application manufacturer: cafe
2015-Dec-03 10:00:52:   [I] CAM Manufacturer code: babe
2015-Dec-03 10:00:52:   [I] CAM Menu string: CryptoWorks
2015-Dec-03 10:00:54:   [I] CAM supports the following ca system ids:
2015-Dec-03 10:00:54:   [I] 0x0d00
2015-Dec-03 10:00:54:   [I] Resending PMTs. Tuner 0
2015-Dec-03 10:00:55:   [I] send_pmt_to_cam: success. tuner 0; (3, 1)
2015-Dec-03 10:00:57:   [I] CAM supports the following ca system ids:
2015-Dec-03 10:00:57:   [I] 0x0d95
2015-Dec-03 10:00:57:   [I] Resending PMTs. Tuner 0
2015-Dec-03 10:00:57:   [I] send_pmt_to_cam: success. tuner 0; (3, 1)
2015-Dec-03 10:01:19:   [I] http_provider::send_thread_func: No stream timeout detected. Setting exit flag
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4696
Joined: Mon Dec 02, 2013 1:11 pm

Re: No output on encrypted streams (DVB-S) with DVBSky 950C

Postby the_man » Fri Dec 04, 2015 5:08 pm

In my case after "send PTM to CAM" i get stream in 2 seconds.
Code: Select all
2015-Dec-04 17:58:55:   [I] Resending PMTs. Tuner 8
2015-Dec-04 17:58:55:   [I] send_pmt_to_cam: success. tuner 8; (3, 1)
2015-Dec-04 17:58:57:   [I] CTSStreamWaiter::ProcessStream. Found first not encrypted packet. Start streaming
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4696
Joined: Mon Dec 02, 2013 1:11 pm

Re: No output on encrypted streams (DVB-S) with DVBSky 950C

Postby sputnik73 » Sat Dec 05, 2015 9:28 pm

the_man wrote:In my case after "send PTM to CAM" i get stream in 2 seconds.


Thx. VLC doesn't show any sent rate in the statics, nothing is streamed.

It seams our local TV (ORF) doesn't work with linux right now.
- ICE ("irdeto cryptoworks envelope")
- 2 modules tried: Icecrypt Irdeto CI/CI+ Secure CAM, TechniSat TechniCrypt CW
- 2 DVB-S cards: DVBsky 950C, TechnoTrend TT-budget S2-3200

Modules and card work with the tv set. I didn't found positive forum posts for the current encryption system (ICE) for linux either, so I finally give it up. Thx for your support!
sputnik73
 
Posts: 4
Joined: Mon Nov 30, 2015 9:06 pm


Return to DVBLink TV server for Ubuntu linux

Who is online

Users browsing this forum: No registered users and 1 guest