Only partial information in TV-Guide

Post your questions about DVBLink products running on Windows platform here!

Only partial information in TV-Guide

Postby appelblom » Thu Feb 16, 2017 9:51 pm

This is a old problem for me with version 5. I tried a new installation yesterday with version 6 and the same problem still exist. Sometimes when i refresh EPG data the TV Guide shows complete data, but for the most times it shows only partial data as in the picture below.

I have Anysee E7 T2C with CAM HD CI+ for Boxer and Boxer TV-card (5 identical). It is the same problem direct on the server in the browser and on the client computers with Windows 7 WMC.

From time to time i tried to search for this problem, but i have never found information or solution for this problem.

Image
appelblom
 
Posts: 15
Joined: Sun Jul 01, 2012 8:12 pm


Re: Only partial information in TV-Guide

Postby appelblom » Fri Feb 17, 2017 6:59 am

Now in the morning the TV-guide was almost empty! This is a new installation on a Windows 7 PC and the recording database is repaird as a test.

Image
appelblom
 
Posts: 15
Joined: Sun Jul 01, 2012 8:12 pm

Re: Only partial information in TV-Guide

Postby the_man » Fri Feb 17, 2017 3:48 pm

Please, make a repair of the database:
http://dvblogic.com/wiki/index.php/How_ ... er.db_file

Also indicate where are you get an EPG data ?
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4664
Joined: Mon Dec 02, 2013 1:11 pm

Re: Only partial information in TV-Guide

Postby appelblom » Fri Feb 17, 2017 4:43 pm

the_man wrote:Please, make a repair of the database:
http://dvblogic.com/wiki/index.php/How_ ... er.db_file

Also indicate where are you get an EPG data ?


I have already done a automatic repair, should i try the manual metod?

The EPG data is from Swedish Boxer.
appelblom
 
Posts: 15
Joined: Sun Jul 01, 2012 8:12 pm

Re: Only partial information in TV-Guide

Postby the_man » Fri Feb 17, 2017 5:21 pm

Are you sure there is a 24/7 EPG data available for your channels?
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4664
Joined: Mon Dec 02, 2013 1:11 pm

Re: Only partial information in TV-Guide

Postby appelblom » Mon Feb 20, 2017 6:49 am

the_man wrote:Are you sure there is a 24/7 EPG data available for your channels?


Yes! If i use the same CI-module with the same Boxer-card in a TV i have data from all channels 24/7.
appelblom
 
Posts: 15
Joined: Sun Jul 01, 2012 8:12 pm

Re: Only partial information in TV-Guide

Postby the_man » Tue Feb 21, 2017 11:30 am

Please, set log level to info, restart dvblink server, wait up to 30 minutes and attach zipped log files here.
viewtopic.php?f=102&t=25723
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4664
Joined: Mon Dec 02, 2013 1:11 pm

Re: Only partial information in TV-Guide

Postby appelblom » Wed Feb 22, 2017 11:07 pm

the_man wrote:Please, set log level to info, restart dvblink server, wait up to 30 minutes and attach zipped log files here.
https://forum.dvblogic.com/viewtopic.php?f=102&t=25723


Ok, i Think i managed to do i right!
Attachments
dvblink-log-20170222-2301.zip
Log file
(54.03 KiB) Downloaded 49 times
appelblom
 
Posts: 15
Joined: Sun Jul 01, 2012 8:12 pm

Re: Only partial information in TV-Guide

Postby the_man » Thu Feb 23, 2017 9:56 am

Please, try make force update of EPG from stream, just follow next steps:
-> go to DVBLink web-interface -> Sources -> click on button Configure (on your tv source) -> Edit advanced settings -> EPG Scan -> Scan (it can take time)-> Ok-> Save
-> then check option Advanced mode (under dropdown list with languages selection )
-> Channels -> EPG sources -> from Available EPG sources choose your source -> click By name -> save
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4664
Joined: Mon Dec 02, 2013 1:11 pm

Re: Only partial information in TV-Guide

Postby appelblom » Fri Feb 24, 2017 6:57 am

the_man wrote:Please, try make force update of EPG from stream, just follow next steps:
-> go to DVBLink web-interface -> Sources -> click on button Configure (on your tv source) -> Edit advanced settings -> EPG Scan -> Scan (it can take time)-> Ok-> Save
-> then check option Advanced mode (under dropdown list with languages selection )
-> Channels -> EPG sources -> from Available EPG sources choose your source -> click By name -> save


When I do an update that you described the EPG update properly, but after 1 or 2 days so it is empty again and I have to update it in the way you describe. It can work one week if I'm lucky. It's like it does not update itself properly and that it is too small buffer for data so it shows only a couple of words and ends with dots that the first image in this thread.
appelblom
 
Posts: 15
Joined: Sun Jul 01, 2012 8:12 pm

Re: Only partial information in TV-Guide

Postby the_man » Fri Feb 24, 2017 9:37 am

So, after the force scan you do have EPG for all channels but for a day(or few )- right?
And how long ahead you do have an EPG on the TV Set?

PS.
Set the "Enable live EPG update" at the DVBlink Web UI -> general Settings
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4664
Joined: Mon Dec 02, 2013 1:11 pm

Re: Only partial information in TV-Guide

Postby appelblom » Fri Feb 24, 2017 9:59 am

the_man wrote:So, after the force scan you do have EPG for all channels but for a day(or few )- right?
And how long ahead you do have an EPG on the TV Set?

PS.
Set the "Enable live EPG update" at the DVBlink Web UI -> general Settings


Usually it is the same information on Windows Media Center computers as in the web interface on the server. Sometimes it seems that is more data in the WMC computers, but it can vary so therefore I have concentrated on the information on the server itself.

I have tested a little with the "Enable Live EPG update" at the DVBlink Web UI -> General Settings" but not experienced any difference, but I can test some more!
appelblom
 
Posts: 15
Joined: Sun Jul 01, 2012 8:12 pm

Re: Only partial information in TV-Guide

Postby the_man » Fri Feb 24, 2017 10:17 am

It also could be that your EPG data streams only on some specific frequencies for all channels. Really hard to say what is wrong. As due to the log files of the server is works like it should.
As an option you may look for some XMLTV epg or buy a subscription for TVAdviser.
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4664
Joined: Mon Dec 02, 2013 1:11 pm

Re: Only partial information in TV-Guide

Postby appelblom » Fri Feb 24, 2017 5:29 pm

the_man wrote:It also could be that your EPG data streams only on some specific frequencies for all channels. Really hard to say what is wrong. As due to the log files of the server is works like it should.
As an option you may look for some XMLTV epg or buy a subscription for TVAdviser.


I had "timefor.tv" EPG provider before and it worked well, but unfortunately they closed the service and there is no similar service in Sweden that I know of. TVadviser are not for Swedish television channels, unfortunately.

Many thanks to you for trying to find the problem!
appelblom
 
Posts: 15
Joined: Sun Jul 01, 2012 8:12 pm

Re: Only partial information in TV-Guide

Postby Jaas » Sun Feb 26, 2017 4:00 pm

Try this one, works perfect for me 149kr/år
https://honeybee.it/tvguide
Server:i7-3770K 3.90GHz, WHS 2011, 2 DuoFlex Tuner DVB-S/S2 CanalDigital Sweden, DuoFlex T2 Boxer Sweden, TVSource 5.1, Connect 5.1, TimeForTV
Clients: KODI 14 on Win 8.1 + Pi, Samsung Note S3, Samsung SmartTV UE50F6655SB 2013
Jaas
 
Posts: 33
Joined: Wed Sep 14, 2011 9:02 pm

Next

Return to DVBLink Server on Windows platform

Who is online

Users browsing this forum: No registered users and 1 guest

cron