Random channel start

Post your questions about DVBLink products running on Windows platform here!

Random channel start

Postby arthurd123 » Mon Nov 14, 2016 12:49 am

HI there,

I have noticed an issue where my other half has been watching something, she then presses the stop button turns off the TV etc and no channels should be in use after that. She currently has one scheduled recording, we use Windows 7 Media Center for recordings too set as default recorder. I then tried to watch something from another computer and I'm getting all tuners are busy message and this is when it's getting weird because no one is or should be using the system. I have a dual tuner Digital Devices for my setup.

Has this happened to anyone before?

Thanks in advance?

PS. Have reinstalled DVBLink Server software last night which I thought would sort this out but still getting this weird behavior.
Attachments
dvblink-log-20161113-2352.zip
LOG FILE
(14.45 KiB) Downloaded 85 times
Server: Windows 7 Ultimate x64, Digital Devices Cine 2 5.5v , DVBLink Server 6.0.0 (13310) DVBLink TV Source 6.0.0 (13310)
Clients: Windows 7 Ultimate x64, S
at Package: NC+
Card Server: Dreambox 500S
arthurd123
 
Posts: 93
Joined: Tue Mar 09, 2010 2:35 pm


Re: Random channel start

Postby arthurd123 » Mon Nov 14, 2016 9:19 am

This morning two channels are up this shouldn't be the case right? No one is watching anything in the morning when we are ready to leave the house!
Attachments
Capture.JPG
Capture.JPG (30.26 KiB) Viewed 3676 times
Server: Windows 7 Ultimate x64, Digital Devices Cine 2 5.5v , DVBLink Server 6.0.0 (13310) DVBLink TV Source 6.0.0 (13310)
Clients: Windows 7 Ultimate x64, S
at Package: NC+
Card Server: Dreambox 500S
arthurd123
 
Posts: 93
Joined: Tue Mar 09, 2010 2:35 pm

Re: Random channel start

Postby the_man » Mon Nov 14, 2016 11:58 am

Please set log level to info, restart DVBLink server, reproduce the issue, download and attach zipped DVBLink log files here.

https://dvblogic.com/wiki/index.php/How ... _log_files
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4696
Joined: Mon Dec 02, 2013 1:11 pm

Re: Random channel start

Postby arthurd123 » Mon Nov 14, 2016 9:37 pm

Here is an example the other half just watched TVP HD 2 and I'm watching TVP HD 1 and just checked the Diagnostic tab and apparentely ESKA TV is being watched.
Attachments
dvblink-log-20161114-2033.zip
(179.6 KiB) Downloaded 89 times
Server: Windows 7 Ultimate x64, Digital Devices Cine 2 5.5v , DVBLink Server 6.0.0 (13310) DVBLink TV Source 6.0.0 (13310)
Clients: Windows 7 Ultimate x64, S
at Package: NC+
Card Server: Dreambox 500S
arthurd123
 
Posts: 93
Joined: Tue Mar 09, 2010 2:35 pm

Re: Random channel start

Postby arthurd123 » Tue Nov 15, 2016 11:19 am

No one is at home now and apparently TVN Turbo is being watched?
Attachments
Capture.JPG
Capture.JPG (52.42 KiB) Viewed 3638 times
Server: Windows 7 Ultimate x64, Digital Devices Cine 2 5.5v , DVBLink Server 6.0.0 (13310) DVBLink TV Source 6.0.0 (13310)
Clients: Windows 7 Ultimate x64, S
at Package: NC+
Card Server: Dreambox 500S
arthurd123
 
Posts: 93
Joined: Tue Mar 09, 2010 2:35 pm

Re: Random channel start

Postby the_man » Tue Nov 15, 2016 11:27 am

Log files looks good. Have you done a port forwarding?

Also try to start any channel and go to Monitoring tab, stop channel - check whether stream stops or not.
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4696
Joined: Mon Dec 02, 2013 1:11 pm

Re: Random channel start

Postby arthurd123 » Tue Nov 15, 2016 1:12 pm

TVN Turbo still running had to stop and start service again no port forwarding on currently. The weird thing is it starts to play channels I hardly watch to be honest. Not sure what is going on but obviously it's an issue if I have two recordings setup at the same time and this happens it will not record as both or even once tuner will be in use.
Server: Windows 7 Ultimate x64, Digital Devices Cine 2 5.5v , DVBLink Server 6.0.0 (13310) DVBLink TV Source 6.0.0 (13310)
Clients: Windows 7 Ultimate x64, S
at Package: NC+
Card Server: Dreambox 500S
arthurd123
 
Posts: 93
Joined: Tue Mar 09, 2010 2:35 pm

Re: Random channel start

Postby arthurd123 » Tue Nov 15, 2016 1:18 pm

Have started and stopped few channels and they show up under the Diagnostics tab and disappear when stream is stopped so all good there. Will keep an eye on it.
Server: Windows 7 Ultimate x64, Digital Devices Cine 2 5.5v , DVBLink Server 6.0.0 (13310) DVBLink TV Source 6.0.0 (13310)
Clients: Windows 7 Ultimate x64, S
at Package: NC+
Card Server: Dreambox 500S
arthurd123
 
Posts: 93
Joined: Tue Mar 09, 2010 2:35 pm

Re: Random channel start

Postby the_man » Tue Nov 15, 2016 4:11 pm

arthurd123 wrote:Have started and stopped few channels and they show up under the Diagnostics tab and disappear when stream is stopped so all good there. Will keep an eye on it.

Aha, please, keep an eye on it from time to time for a few days. Just to get some info.
NETGEAR RNDU2000; Synology DS112j, DS 212j, DS213+, DS 712+; Western Digital WD ex2; Asustor AS3, RPI2 ...
PCTV 460,461e,292e; TT 4400, 4650CI;DVBSKy S960; DD octopus net; Inverto sat2ip multibox; TBS DVB-C ...
the_man
 
Posts: 4696
Joined: Mon Dec 02, 2013 1:11 pm

Re: Random channel start

Postby arthurd123 » Tue Nov 15, 2016 5:03 pm

the_man

Thanks for your time looking into this it's definitely appreciated. I will keep monitoring this and let you know if things change.

Arthur
Server: Windows 7 Ultimate x64, Digital Devices Cine 2 5.5v , DVBLink Server 6.0.0 (13310) DVBLink TV Source 6.0.0 (13310)
Clients: Windows 7 Ultimate x64, S
at Package: NC+
Card Server: Dreambox 500S
arthurd123
 
Posts: 93
Joined: Tue Mar 09, 2010 2:35 pm


Return to DVBLink Server on Windows platform

Who is online

Users browsing this forum: No registered users and 1 guest